配置说明:
1、FB:400—1500mm FH:600—2400mm 最大承重:130KG
2、当FH≥1500mm需增加使用蓝色配置
3、客户可根据图册拨叉式执手系列选配其它款式执手
4、建议:锁点的分布间距保持在700mm以内
5、建议:窗型比例(高/宽)保持在1.5:1
Configuration InstructiOns:
FB:400-1 500mm FH:600-2400mm Maximum loading capacity
1、FB:400—1500mm FH:600—2400mm Maximum loading capacity:130KG
2、When FH≥1500mm,the configuration in blue color shall be applied
3、Advice:The lock point spscing shall be smaller than 700mm
4、Advice:The height/width of the window shall be 1.5:1
标准配置/Standard Configuration
01-601 | 02-3312 | 03-3311 | ||
执手 | 中传动器 | 边锁杆 | ||
04-锁座01 | 05-3304 | 06-3313 | ||
锁块 | 提升垫块 | 助升块 | ||
07-302A | 08-FKT | 09-3314 | ||
合页 | 欧标限位风撑 | 中间锁 |
序号/NO. | 产品名称/Item Name | 型号/Code | 数量/Quantity | 备注/Mark |
1 | 执手Handle | 601 | 1 | 可选配/An optional |
2 | 中传动器central driver | 3312 | 1 | |
3 | 边锁杆side locking bar | 3311 | 2 | |
4 | 锁块locking piece | 锁座01 | 2 | |
5 | 提升垫块lifting pad | 3304 | 1 | |
6 | 助升块rising block | 3313 | 1 | |
7 | 合页Hinge | 302A | 2 | 可选配/An optional |
8 | 欧标限位风撑European standard wind brace | FKT | 1 | |
9 | 中间锁central lock | 3314 | 1 | 可选配/An optional |
可选执手/Optional Handle
603 | 603 | 605BF | ||
执手 | 执手 | 执手 | ||
607 | 609 | |||
执手 | 执手 |
内平开下悬系统与铝型材“C”型槽口尺寸配合图
The size matching between Ruinuo turn—and—tilt syatem and“C”type notches of aluminum profiles.
企业简介Enterprise Introduction
铝型材配合图 | 执手子L槽的加工尺寸图 | |
Matching drawing of aluminum profiles |
Processing size drawing of the handle slots |
窗扇上活动五金件截面图 | 标准连接铝滑杆截面图 | 标准连接铝滑杆开孔图 | ||
Sectional view of movable hardware accessories on the sash | SectionaI view of aluminum slider with standard Connector | Hole openness drawing of aluminum slider with standard connector |
斜拉杆此部位可向水平方向调节±2.0mm 使窗扇顶部水平 | 斜拉杆此部位可调节窗扇顶部的密封性 | |
This diagonal rod can be horizontally adjusted within arange of ±2.0mm to make the top of the sash parallel to the ground. | The diagonal rod can be adjusted to ensure the sealing performances of the sash top. | |
下合页此部位可调节使窗扇左右平行 | 下合页此部位可调节窗扇的上下水平 | |
The upper hinge can be adjusted to make the right side of the sash parallel to its left side | The lower hinge can be adjusted to make the upper side of the sash parallel to its lower side |
◆佛山市南海区特坚建筑五金有限公司是专业生产高档铝合金门窗配件,位于有中国铝材生产基地之称的广东省佛山市南海区,连接广佛大动脉,距离省府广州及佛山市中心仅为十五分钟车程,交通便捷物流发达!是一家专业从事铝合金门窗配件领域开发/设计及生产销售的业内领先企业,拥有现代化大型标准厂房及各种先进制造设备。
◆特坚五金开发制造产品涵盖各类型平开窗/推拉窗/欧槽内开内倒/幕墙上悬窗系列配套的执手、合页、窗锁、等高标准专业门窗配件。自创建以来,依托雄厚的资本实力、尖端的技术优势、优异的品质与卓越的市场服务获广大客户的一致口碑,同时以配套齐全、货源充足、交货及时享誉业内。
◆公司本着“市场需求为首位,以质量为中心,以服务为目标”的营销战略,公司在发展当中不断自我完善,使公司在激烈的市场竞争中保持高速的发展,形成了立足国内拓展国外的营销网络,产品销售'逐步晦国际市场接轨。
专业五金配件
Professional hardware accessories
信,立业之本。诚信是企业赢得尊重与认可的道德光环。本公司深知诚信大义,内对员工以诚信,抱得强大团队力量;外对合作伙伴以诚信,抱得双方共赢:广对客户以诚信,获得嘉誉频频!